Table of Contents
Advertisement
Brake calliper make: BREMBO, radially-mounted
monobloc callipers.
Calliper piston diameter: 32 mm (1.26 in).
Number of pistons per calliper: 4.
Front brake type: M4.32 B (4x32).
Friction material: BRM11E HH.
Brake master cylinder type: radial.
Cylinder Ø: 18 mm (0.71 in).
REAR
With fixed drilled steel disc.
Disc diameter: 265 mm (10.43 in).
Rear brake disc thickness: 6 mm (0.24 in)
Disc thickness (maximum wear): 5.4 mm (0.21 in).
Braking surface: 210 sq. cm (32.55 in
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO, floating 2-piston
calliper with cornering ABS as standard.
Fixed, 28 mm (1.10 in) diameter 2-piston calliper.
Friction material: TT 2182 FF.
Brake master cylinder type: PF 2x28 D.
378
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
Transmission
Hydraulically-controlled slipper self-servo wet
multiplate clutch.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Front chain sprocket/clutch gearwheel ratio: 33/61.
Spur gears, 1.84:1 ratio.
6-speed gearbox with constant mesh gears, gear
2
).
change pedal on left side of motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/43.
Total gear ratios:
st
1
gear 37/15
nd
2
rd
3
th
4
th
5
th
6
Attention
The brake fluid used in the brake system is
gear 30/17
gear 28/20
gear 26/22
gear 24/23
gear 23/24
Advertisement
Table of Contents
