Use the PHONE function:
to manage incoming calls by means of button (1),
button (2) and button (4);
to recall the last calling number within 5 seconds
from call interruption (RECALL function);
to recall any of the last 7 calling numbers from
the list under LAST CALLS function (page 110).
It is not possible to make a call by selecting the
name/number from the contact list through the
In the TRACK and OFF ROAD layouts, when there is
an incoming call, the instrument panel will not
display the caller's name or number. The rider will
hear the ringing tone through Bluetooth earphones
upon any incoming call.
To answer the call, press button (1).
To reject the call, press button (2).
To end the call once accepted, press button (2).
TRACK 01 - U2...
Km / h
>>> MARIO ROSSI
If there is an incoming call while the Player is active,
the latter is paused throughout the phone call and
will resume operation when call is over.
If motorbike is in FULL or CITY layout, during the 5
seconds after hang-up, the rectangle corresponding
to the Recall function is activated to allow the recall.
After this 5 second time, the rectangle of the Recall
function is disabled.
To activate the Recall function within the 5 seconds,
press button (1).
In TRACK and OFF ROAD layouts, no Recall function