Table of Contents
Advertisement
Note
Vehicle speed must be below or equal to 5 km/
h (3 mph) for activating the ABS enabling procedure;
if it is not so, you can only scroll the functions of the
Menu using buttons (1) and (2).
After pressing button (4) within the Menu, "WAIT ..."
is displayed (instead of "ABS OFF) for 2 seconds.
During this time, Menu scrolling via buttons (1) and
(2) is disabled.
When system is enabled, "ABS ON" is displayed, the
ABS light (10, Fig 9) turns on to indicate that the ABS
is active and buttons (1) and (2) are enabled.
If the ABS status does not change in 5 seconds, the
instrument panel will replace "WAIT ..." message
within the Menu with "ABS-ERR" message blinking
for 3 seconds.
After 3 seconds:
-
if disabling was requested, the instrument panel
automatically shows again "ABS ON" and the
request can be made again, if required;
114
-
if enabling was requested, the instrument panel
automatically shows again "ABS OFF" and the
request can be made again, if required.
Advertisement
Table of Contents
