Ducati Multistrada 950S 2019 Owner's Manual page 195

Setting the rear tyre reference pressure
When accessing the reference pressure setting page
of the rear tyre, the display shows two arrows on the
reference pressure value indicating the possibility to
set it.
On the right the display shows the currently set
value.
Press button (1) to increase the value by 0.1 bar (1.54
psi), for example:
1.5 bar (21.76 psi), 1.6 bar (23.21 psi), 1.7 bar (24.66 psi)
up to a maximum of 3.0 bar (45.51 psi).
Press button (2) to decrease the value by 0.1 bar (1.54
psi), for example:
3.0 bar (45.51 psi), 2.9 bar (42.06 psi), 2.8 bar (40.61
psi) up to a minimum of 1.5 bar (21.76 psi).
Press button (4) to confirm the set value and go back
to the previous page.
194
Rear Tyre 2.5 bar
...
Important
Ducati recommends that the values to be set as
a reference for the tyre pressure sensors are entered
as specified in paragraph "Tubeless Tyres" (page
355).
Every time you replace the tyres, set the pressure
values by respecting what Ducati specifies in
paragraph "Tubeless Tyres" (page 355).
1
2.4 bar
2 4
Fig 148