Trip Meter 1 (Trip 1) - Ducati Multistrada 950S 2019 Owner's Manual

Trip meter 1 (TRIP 1)

The trip meter counts and displays the partial
distance covered by the motorcycle with the set unit
of measurement (km or mi) and is used as a basis to
calculate average fuel consumption, average speed
and trip time. The mi or km value for TRIP 1 is
displayed with the "TRIP 1" indication and unit of
measurement.
When the reading exceeds the maximum value of
9999.9 mi or 9999.9 km, distance is reset and the
meter automatically starts counting from 0 again.
If button (4) is pressed when trip meter is displayed,
the instrument panel will activate the warning
"RESET ?" in place of the value and unit of
measurement. When this warning is active, Menu
scrolling is not possible.
If you press button (1) or (2), the instrument panel will
display TRIP 1 again, without resetting the value.
While if you press button (4), value for TRIP 1 will be
reset and the instrument panel will display TRIP 1 at
"0.0" followed by set unit of measurement.
When TRIP 1 is reset, the average fuel consumption,
average speed and trip time data are reset as well.
100
CONS
AVG 1
56.5
TRIP 1
TRIP
TIME 1
The TRIP 1 counter is automatically reset in case the
system unit of measurement is changed manually or
after a battery-OFF: the counter will then start back
from zero, considering the new units of
measurement.
13.5
Km/l
Km
1:54
2
1
4
Fig 38