Self-Diagnosis Reset Procedure - KYMCO Downtown 350i Repair Manual

6.Fuel System
Downtown 350i

Self-Diagnosis Reset Procedure

Note: The self-diagnosis memory cannot be reset when there is still a problem
inside the system.
1. Put the side stand up and engine stop switch is at "RUN".
2. Turn the key to the ON position and wait for ten seconds.
3. Fully open the throttle and wait for ten seconds.
4. Release the throttle.
5. After 5 seconds the indicator will blink twice.
6. After the CELP goes out the self-diagnosis memory of the ECU is cleared. If
the CELP remains lit a trouble code is still present.
6-52