Keypad Functions - Cardinal 220 Quick Setup Manual

The following describes the keys and their functions as used during setup and
calibration. For complete details on the 220 Indicator keypad functions, refer to the
220 Weight Indicating Instrument Technical and Operation Manual, 8200-M502-O1.
ON/OFF (K) KEY
This key is used to apply and remove power to the indicator. In the alphanumeric mode, it is used
to enter the letter "K".
0 THROUGH 9 (P THROUGH Y) KEYS
These keys are used to enter numeric data during setup and calibration. The 1 and 0 are also
used to answer yes (1 = YES) or no (0 = NO) to various prompts. In the alphanumeric mode, they
are used to enter the letters "P" through "Y".
✱ ASTERISK KEY
During Setup, when a setup parameter is displayed, pressing this key will "backup" to the previous
prompt. Pressing this key during entry of data will toggle the keypad to the "alpha" mode. It is also
used in conjunction with the other keys on the keypad to access additional indicator functions.
ENTER (Z) KEY
The ENTER key is used to signal completion of the entry of data and causes the indicator to
process the data entered. When reviewing setup parameters, pressing the ENTER key will display
the current setting of the parameter. In the alphanumeric mode, it is used to enter the letter "Z".
ZERO/REVIEW (A) KEY
Pressing this key after the ASTERISK key will enter the Review mode of Setup and Calibration.
Refer to the Setup Review section of this guide for details. In the alphanumeric mode, this key is
used to enter the letter "A".
TARE (B) KEY (WITH DIAMOND "T" SYMBOL)
In the alphanumeric mode, this key is used to enter the letter "B".
NET/GROSS (C) KEY
In the alphanumeric mode, this key is used to enter the letter "C"
TARE (D) KEY (WITH WEIGHT "T"SYMBOL)
In the alphanumeric mode, this key is used to enter the letter "D".
UNITS/TEST (E) KEY
Pressing this key after the ASTERISK key will enter the Test mode and conduct a test of all display
elements. The test consists of 12 cycles, each lasting about one second:
1. The model number and the software version are displayed.
2. All alphanumeric characters and annunciators will turn on.
3. The calibration numbers (C1 to C4) are displayed.
In the alphanumeric mode, this key is used to enter the letter "E".
START/STOP (F) KEY
In the alphanumeric mode, this key is used to enter the letter "F".
MEM (G) KEY
In the alphanumeric mode, this key is used to enter the letter "G".

KEYPAD FUNCTIONS

13