Appendix; Table Of Preset Functions - Sony RM-VL900 Operating Instructions (primary manual) Operating Instructions Manual

Appendix

Table of Preset
Functions
Note
There may be some components or
functions that cannot be operated with
this Commander.
TV
KEY DISPLAY FUNCTION
0POWER To turn on and off.
To change the channel.
1qa
1 – 9, 0, ENT For example, to change
to channel 5, press 0 and
5 (or, press 5 and ENT).
To change the input
3TV/VIDEO
mode.
To display the current
4DISPLAY
channel on TV.
To operate SLEEP
qsSLEEP
function on the TV
(works only for a TV
with SLEEP function).
To call up the MENU
7MENU
display.
50
KEY DISPLAY FUNCTION
6v To move the cursor
upward.
To move the cursor
6V
downward.
To move the cursor to
6B
the right.
6b To move the cursor to
the left.
To enter the selection of
6OK
the MENU display.
To turn on/off the
2PIP
"window" picture.*
To change the TV
5x
channel + in the
"window" picture.
5X To change the TV
channel – in the
"window" picture.
To change the input
5m
mode of the "window"
picture.
To freeze the "window"
5REC z
picture.
5M To swap the "main"
picture and the
"window" picture.
qfCH +/– Channel up: +
Channel down: –
qgRECALL To operate JUMP,
FLASHBACK or
CHANNEL RETURN
function on the TV
depending on the setting
of the TV's
manufacturer.
8VOL +/– Volume up: +
Volume down: –
To mute the volume on
9MUTING
the TV. Press again to
turn muting off.
* If the "window" picture does not turn
off this way, try pressing ENT while
pressing PIP.