Download Print this page

Changing Or Erasing The Function Of A "Learned" Button - Sony RM-VL900 Operating Instructions (primary manual) Operating Instructions Manual

Remote controls: integrated remote commander
Hide thumbs

Advertisement

Changing or erasing the
function of a "learned"
button
To change the "learned" function,
clear it first and perform Learning
again.
To clear the "learned" function
of a single button
Example: To erase the "learned"
function from the Number
button 1 in VCR mode.
1
Press and hold S (set) for
over 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
2
While holding the desired
Component Select button
pressed, press the button
you want to erase.
The S (set) indicator turns off,
and the selected Component
button lights up.
Note
Be sure to press both buttons at
once. If you release the Component
Select button, the Commander
changes to Learning mode.
3
Press S (set) to finish
setting.
Continued
19

Advertisement

loading

  Also See for Sony RM-VL900 Operating Instructions (primary manual)

  Related Manuals for Sony RM-VL900 Operating Instructions (primary manual)

  Related Content for Sony RM-VL900 Operating Instructions (primary manual)