Using Unpreset Remote Control
— Learning Function (continued)
To clear all function signals
"learned" for a specific
Example: To erase all functions
"learned" by VCR button.
Press and hold S (set) for
over 3 seconds.
The S (set) indicator lights up,
and all Component Select
While holding x pressed,
press the desired
Component Select button.
The S (set) indicator turns off,
and the selected Component
button lights up.
Through this operation, you can
only erase the "learned" functions
of all buttons for a specific
component and the Channel Macro
function. The "learned" functions
for the Component Select buttons
cannot be changed here. You must
be sure beforehand of which
"learned" function you want to
Press S (set) to finish