Using Unpreset Remote Control Operations - Learning Function - Sony RM-VL900 Operating Instructions (primary manual) Operating Instructions Manual

Using Unpreset
Remote Control
Operations
— Learning Function
To operate unpreset components
or functions, use the following
Learning procedure to "teach" any
of the programmable buttons to
operate the functions of another
remote control. You can also use
the Learning function to change
the signals of individual buttons
after setting the component code
number (page 8).
It is recommended that you make
a note of the "learned" key
functions.
Note
Some specific remote control signals
may not be "learned".
Example: To program the N
(Play) signal of your component
to the VCR N (Play) button of
the Commander
1
Place the RM-VL900 head
to head with your
component's remote
control.
Remote control for
your component
about 2 – 4 inches
(5 – 10 cm) away
2
Press and hold S (set) for
over 3 seconds.
The S (set) indicator lights up,
and all Component Select
buttons flash.
RM-VL900
Continued
15