Operating Your Components With The Remote Commander - Sony RM-VL900 Operating Instructions (primary manual) Operating Instructions Manual

Setting the Code for Preset
Audio and Visual Components
(continued)
4
Press ENT.
The Component button turns
off.
5
Check if the code number
works by following the
instructions on page 10.
To cancel setup, press S (set).
12
Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 8).
Example: To play a CD player
1
Press the desired
Component Select button.
The Component button lights
up when you press it, and
turns off when you release it.