Download Print this page

Changing The Interval Between Operation Steps - Sony RM-VL900 Operating Instructions (primary manual) Operating Instructions Manual

Remote controls: integrated remote commander
Hide thumbs

Advertisement

Changing the interval
between operation steps
You can control the interval in 4
steps (approx. 127 ms, 408 ms, 708
ms, 974 ms).
For the SYSTEM CONTROL
buttons
1
Press S (set).
All Component Select buttons
flash.
2
While holding one of the
SYSTEM CONTROL
buttons (1, 2 or 3) whose
interval you want to change
pressed, press one of the
Number buttons (1 – 4) to
select the interval.
1: Approx. 127 ms (the
factory setting)
2: Approx. 408 ms
3: Approx. 708 ms
4: Approx. 974 ms
(ms: 1/1000 second)
All Component Select buttons
light up when you press these
buttons, and turn off when you
release them.
Note
If you press a Number button apart
from 1 – 4, the S (set) indicator
flashes twice, and the Commander
returns to its state in Step 1. Be sure
to select from 1 – 4.
Continued
29

Advertisement

loading

  Also See for Sony RM-VL900 Operating Instructions (primary manual)

  Related Manuals for Sony RM-VL900 Operating Instructions (primary manual)