Selecting A Programme Position With A Single Key Press - Channel Macro Function - Sony RM-AV3000T Operating Instructions Manual

Transferring Data between
Commanders (continued)
Notes
• If the Commander is not ready for
receiving the data, press the CLEAR key,
then press the RETURN key to clear the
learned signal on all or one of the
Component Select buttons.
• If "NG" appears during data transfer, go
back to Step 3 and continue the operation
or press COMMANDER OFF to stop the
operation. If you continue the operation,
you have to set the sending Commander
again to send data.
5
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
58
Selecting a Programme
with a Single Key Press
— Channel Macro Function
You can programme the Channel Macro
function of the components of which the
first digit of the four-digit preset
component code number is 3 (STB),
8 (TV) or 9 (CABLE).
And you can programme the Channel
Macro function for the macro keys (Label
keys) when the selected component name
is displayed on the Mode Display key in
Step 4, page 59.
If you programme the operation of
entering the 1, 2 and 3 keys for a macro
key (Label key), you can select
programme 123 by pressing that single
key.
3
5
TV STB VCR
SYSTEM CONTROL
1 2
OK
MENU EXIT
DVD CD AMP OTHER
COMMANDER
TIMER OFF
3 MORE
PROGRAM
2
6
4
8
1