Setting the Code for Preset Audio
and Visual Components
Finding a component code
with the Search function
You can find a code number available for
a component that doesn't have one in the
supplied "Component Code Numbers."
Before starting the Search
Set each component to the following
status to enable the Search function.
TV, AMP: Power-on
CD, MD, TAPE, DAT: Power-on with a
playback source (disc, cassette tape, etc.)
Other components: Power-off
While pressing COMMANDER
OFF, press %.
"SET" appears on the Mode Display
Press the PRESET key.
"PRESET" appears on the Mode
Select the desired component by
pressing the Component Select
button or the Label key.
To change the Label keys, press the
OTHER button repeatedly. Each time
you press the OTHER button, the
display of the Label keys changes as
in Step 4 on page 13.
When the desired component is
selected, the component name
previously preset to the Component
Select button or the Label key (in this
case, TV) and the four-digit
component code number previously
set to the component is displayed.