Components with the
When you operate a non-Sony
component, make sure you set the
component code first (page 12).
Example: To play a DVD player
Press the corresponding
Component Select button or the
Label key for the component you
have set up.
To display and change the Label keys,
press the Mode Display key
The Commander comes on and the
keys for operating the selected
component are displayed.
To change the Label keys, press the
Mode Display key (in this case, DVD)
repeatedly. Each time you press the
DVD key, the display of the Label
keys changes as follows.
Press the desired key in the
When the remote control signal is
is displayed on the display.
If necessary, you can also use buttons
on the Commander, such as the
2 +/– buttons, the % button or the
PROGRAM +/– buttons, other than
See "Table of Preset Functions" (page
88) for the functions of keys and
buttons for each component.
When you are done using the
COMMANDER OFF to turn the