Location and Function
1 Clock Display key (page 8)
Displays the clock, the transmission
mark, the battery mark and the timer
2 Mode Display key (page 8, 13, 20, 30,
Displays the status of the selected
Function of the key changes according
to the selected mode.
3 LCD touch key display
The keys used for operating each
component and setting the
Commander are displayed.
Do not press the touch keys using sharp
objects such as pins or ballpoint pens.
4 Label keys (page 8, 13, 20, 23, 30,
32, 40, 79)
The selected modes (up to 8 characters
in each Label key) are displayed.
Labels change in the order from the
first stage to the third stage and come
back to the first, and so on, each time
you press the Mode Display key,
OTHER, MORE, or TIMER button
according to the selected mode.
5 Component Select buttons (page 12)
Select the component to control.
6 OTHER button (page 13)
Label keys change in the order from
the first stage to the third stage and
come back to the first, and so on, each
time you press the OTHER button
when the selected component name is
displayed on the Label keys.
7 TIMER button (page 68)
Used to set the timer programme, and
to set the timer programme on or off.
button (page 76)
Used to light up the LCD display in
the dark. Press the button once to turn
on the light, and once again to turn it
9 COMMANDER OFF button
Turns the power of the Commander
off. Then all the display contents are
0 PROGRAM +/– buttons (page 88, 89,
Select the programme position.
button (page 88)
qs 2 +/– buttons* (page 19, 29)
Adjust the volume.
qd % button* (page 19, 31)
Mutes the audio. Press the button
once again to resume at the previous