Using Non-Preset Remote Control
— Learning Function (continued)
Example: To programme the N
(Play) signal of your component
to the VCR N (Play) key of the
Place the RM-AV3000T head to
head with your component's
Remote control for
about 2 – 4 inches
(5 – 10 cm) away
While pressing COMMANDER
OFF, press %.
"SET" appears on the Mode Display
Press the LEARN key.
"LEARN" appears on the Mode
Select the desired component of
which signals are to be learned by
pressing the Component Select
button or the Label key.
To change the Label keys, press the
OTHER button repeatedly. Each time
you press the OTHER button, the
display of the Label keys changes as
All the learnable keys flash.