Technical Data; Basic Information (General); Proper Use; Improper Use - KERN YKD Series Operating Instructions Manual

Second display
Table of Contents

Advertisement

1 Technical data

Second LCD with a numeral height of 25 mm
Voltage supply is provided by the supplied plug-in power unit 9V 300 mA
or by a 9V block battery.
3 x RS232 interface:
1 input port for link-up to balance
2 output ports for connection of printers, PC, label printers etc.

2 Basic Information (General)

2.1 Proper use

The second display unit acquired by you serves as an additional display unit away
from the balance and is used for the display of the weighing value for material to be
weighed. It is possible to connect a further 2 devices with serial RS232 interfaces.

2.2 Improper Use

Never operate second display unit in explosive environment. The serial version is not
explosion protected.
The structure of the second display may not be modified. This may result in incorrect
display results, safety-related defects as well as destruction.
The second display may only be used according to the described conditions. Other
areas of use must be released by KERN in writing.

2.3 Warranty

Warranty claims shall be voided in case
• Our conditions in the operation manual are ignored
• The appliance is used outside the described uses
• The appliance is modified or opened
• mechanical damage and damage caused by media, liquids
natural wear and tear
• The appliance is improperly set up or incorrectly electrically connected
YKD-BA-e-0710
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ykd-01Ykd

Table of Contents