Keysight N4391B Getting Started Manual page 42

4 Rack Mount
42
3 Mount the optical modulation analyzer in the rack.
a Slide the optical modulation analyzer onto the rails in the rack.
b Using a cross-recess Phillips screwdriver, and the screws from the
rack mount kit (screw part number 0570-1577), screw the flanges at
the left and right of the optical modulation analyzer to the rack.
4 Swap the bottom trim plate of the UXR-Series Oscilloscope Rack
Mount Kit (N2156-24104) for the one supplied with the N4371B Rack
Mount Kit (N4391-24104).
5 Mount the oscilloscope in the rack according to the procedure in the
UXR-Series Oscilloscope Rack Mount Kit Installation Guide
(N2156-97000). Mount the oscilloscope directly above the optical
modulation analyzer.
Keysight N4391B Optical Modulation Analyzer Getting Started Guide