4: Installation
4.1: Before installation
Connecting the device in a manner inconsistent with this
!
manual may cause risk to health, life or material damage.
Do not power the device before fully assembling it in the mount-
•
ing box,
•
Connect only in accordance with one of the diagrams,
•
Install only in flush mounting boxes compliant with a relevant na-
tional safety standards and with depth no less than 40mm,
•
Do not connect devices which are not compliant with the specifi-
cation or relevant safety standards,
Do not connect heating devices,
•
•
Do not connect SELV or PELV circuits.
•
Make sure you have all required parts when installing with covers
other than FIBARO (see "Parts compatibility" on page 39).
Device parts:
2
1
1 – switch button, 2 – cover plate, 3 – unit (device), 4 – mounting
frame
Notes for diagrams:
4
3
N – terminal for neutral wire
Q1 – output terminal of the 1st channel
Q2 – output terminal of the 2nd channel
L – terminal for live wire
G – groove used to measure wire length
7
InstallatIon