Table of Contents
Advertisement
14
7: Operating the device
7.1: Controls
7.2: Single/Double Switch operating mode
The device can work as single or double switch:
•
•
To change operating mode before adding to Z-Wave network:
1. Quickly, three times click, then press and hold one of the buttons
2. Release button when the device glows white.
3. Quickly click the button to confirm.
4. The device will change and signal the new operating mode:
To check operating mode after adding to Z-Wave network:
1. Quickly, three times click, then press and hold one of the buttons
2. Release button when the device glows white.
3. Quickly click the button to confirm.
operatIng the DevIce
1
3
2
Double Switch mode (default) – the device can control two sepa-
rate loads, but they can be up to 13A per channel and 16A total.
Single Switch mode – the device can control only one load, but it
can be rated up to 16A.
Changing operating mode must performed before
i
adding it to the Z-Wave network!
to enter the menu.
•
1 white blink – Single Switch mode,
•
2 white blinks – Double Switch mode.
to enter the menu.
1. First button,
2. Second button,
3. LED ring.
Advertisement
Table of Contents
