Activating The Device - FIBARO WALLI FGWDSEU-221 Operating Manual

10
When installing with Legrand cover plates:
1. Insert the device with mounting frame* into the mounting box
2. Snap the switch button adapter* to the device.
3. Snap the new inner cover plate to the device.
4. Snap the new outer cover plate to the device.
5. Snap the new switch button to the device.
When installing with Schneider cover plates:
1. Insert the device with mounting frame* into the mounting box
2. Snap the new cover plate to the device.
3. Snap the new switch button to the device.
4.5: Activating the device
1. If the device fully assembled, switch on the mains voltage.
2. LED ring light means the device is powered and can be added to
InstallatIon
and secure with mounting claws and screws.
and secure with mounting claws and screws.
* Switch button adapter and additional mounting frames
are sold separately.
the Z-Wave network.