FIBARO WALLI FGWDSEU-221 Operating Manual page 19

The device allows to control 5 regular or multichannel devices per an
association group, with the exception of "LifeLine" that is reserved
solely for the controller and hence only 1 node can be assigned.
Assocation groups mapping
Root
Association Group 2
Association Group 3
Association Group 4
Association Group 5
Single Switch Mode: commands sent to association groups for
parameter 20 set to 1
1 click
Basic Set:
Button 2nd group,
1 and 2 Multilevel
(toggle) Set: 3rd
group
Single Switch Mode: commands sent to association groups for
parameter 20 set to 2
1 click
Basic Set:
Button 1
2nd group,
(ON),
Multilevel
Button 2
Set: 3rd
(OFF)
group
Double Switch Mode: commands sent to association groups for
parameter 20 set to 1
1 click
Basic Set:
2nd and 4th
Button
group,
1 and 2
Multilevel
(toggle)
Set: 3rd and
5th group
Endpoint
Endpoint 1
Endpoint 1
Endpoint 2
Endpoint 2
2 click
Basic Set:
Multilevel
2nd group,
Start Level
Multilevel
Change: 3rd
Set: 3rd
group
2 click
Basic Set:
Multilevel
2nd group,
Start Level
Multilevel
Change: 3rd
Set: 3rd
group
2 click
Basic Set:
Multilevel
2nd and 4th
Start Lev-
group,
el Change:
Multilevel
3rd and 5th
Set: 3rd and
5th group
Association group in
endpoint
Association Group 2
Association Group 3
Association Group 2
Association Group 3
Hold Release
Multilevel
Stop Level
Change: 3rd
group group
Hold Release
Multilevel
Stop Level
Change: 3rd
group group
Hold Release
Multilevel
Stop Lev-
el Change:
3rd and 5th
group group
19
confIguratIon