Product Overview; Features Of Ust-05Ln/Ust-05La - HOKUYO AUTOMATIC UST-05LN User Manual

3. Product overview

This chapter describes the features and properties of UST-05LN/UST-05LA.

3.1 Features of UST-05LN/UST-05LA


Detection range : Maximum 5m

Detection angle : 270°

Angular resolution : 0.5°

31 set of areas (configurable)
 LED indicates UST's status

Easy configuration using PC installed with UST configuration application software (Area Designer)

Teaching function
For detail refer to Area Designer instruction manual

Minimum response time of 66ms (configurable)

Malfunction output: Activates malfunction output according to self-diagnosis function.

Synchronize function: A maximum of 3 sensors for master/slave operation is possible

Hysteresis function of detection area

ON delay and OFF delay function

Minimum detectable size set function

SD Card Log function (for UST-05LA only)

SCIP communication protocol (for UST-05LA only)
For details refer to the communication protocol specification "Document No. C-42-4049"

Laser emission skip function: It is possible to set laser pulse skip and scan skip.
*Non-supported in the firmware version below "1.00".
Redundant slave function
*Not supported in the firmware version below "2.00".
UST can be used for the following applications:

Security monitoring of a building and locations (entrances, passages, etc.)

In detecting the collapse of cargo at an automatic warehouse, detection of protruding objects from
shelves.

In automated guided vehicles (AGV), overhead transportation (OHT), robots, cranes, etc.

For automation process (detection of transported object)

Object detection

Other similar applications
Document No: C-41-02490-9
7