Sd Card Log Function (For Ust-05La Only) - HOKUYO AUTOMATIC UST-05LN User Manual

3.15 SD card log function (for UST-05LA only)

With this function the UST by itself can record data log (distance, intensity, output states and recording
time) using an internal microSD card without connecting to Area Designer. The recorded log data can be
saved (downloaded) and played in the Area Designer. Maximum possible recording time is about 13 hours.
For the details of operation method, refer to (Area Designer UST series sensor configuration tool Instruction
manual)





.


24
During the normal operation of UST, it records log data to SD card
continuously. However, log data will not be recorded during the Edit mode
or writing configuration to Area Designer.
Even if the UST is restarted, it continues recording starting from the last
written log data entry on the SD card. If you want to record log data from the
beginning, delete log data using Area Designer.
Be careful if log data is recorded exceeding the maximum recording time, UST
will start overwriting from the first recorded log data entry on the SD card.
In case you want to confirm the detection judgment of the area when playing
SD log data, it is necessary to open the original project file used while
recording the data. Please make sure to save the project file.
By using Area Designer you can set UST's internal date/time. When internal
time is set, UST also records the date/time on the SD card log data.
*
When the power supply is switched off for more than 5 hours, returns to
default time therefore you need to reset the date/time.
*1: For the product UUST0** will be about 6 hours.
When downloading SD card log data, select "Prioritize recording (Continuous
mode) of application setting in Area Designer, then it will increase the
download speed. (When downloading in the firmware version below "1.00",
make sure to OFF "Prioritize recording (Continuous mode)".)
Document No: C-41-02490-9
*1