Playing Log Data - HOKUYO AUTOMATIC UST-05LN User Manual

3.14.2 Playing log data

Follow the steps below for playing log data.
① Click play button as shown in figure 3-15.
(Cannot play the log data until measurement display button is OFF)
② Log player is displayed as shown in figure 3-16.
Click "Open" and select the log data file which you want play.
③ Use control buttons as required as shown in figure 3-16.



Measurement display [Ctrl+0]
Figure 3-15 Play log data button
Figure 3-16 Log player windows
In case you want to confirm the detection judgment of the area when playing
log data, it is necessary to open the original project file used while recording
the log data. The area displayed for the current project might differ from the
original project.
Play log data in the Monitor mode. If you play log data in Edit mode, output
status will not be displayed.
By using this icon
output changes.
Play log data
automatically takes/moves up to the position where
Document No: C-41-02490-9
Open
23