Ust Area Designer Application Software; Area Designer; System Requirements - HOKUYO AUTOMATIC UST-05LN User Manual

7. UST Area Designer application software

Install application software (Area Designer) in a supported operating system and connect UST using a USB
cable. Area Designer has the following functions:

Configuration of detection area

Configuration of various UST functions

Display of measurement data

Record and playback of measurement data

Project data management (save and open of project data).

7.1 Area Designer

Application software (Area Designer) can be downloaded from our homepage.
For details of installation and operation please refer to Area Designer UST Series sensor configuration tool
Instruction manual.

7.2 System requirements

CPU
PC RAM
Hard disk
Microsoft
Compatible OS Microsoft
Microsoft
Display High color (16bit color) or above , 800×600 dot or above
(Note) Microsoft, Windows are the registered trademarks of Microsoft Corporation USA.
The operation in the below system environment cannot be guaranteed.

Other OS that is not mentioned above.

NEC PC98 series and its compatible device.

Self made PC

Multi boot environment

Multi monitor environment
Table 7-1 Minimum system required for Area Designer
Ⓡ
Windows 7 Professional
Ⓡ
Windows 8.1
Ⓡ
Windows 10
Pentium ® Ⅳ processor of 800MHz or above
512MB or more
150MB minimum free space
Document No: C-41-02490-9
39