The Packaging Includes; Connecting Of The Dispensing Tap - LINDR PYGMY 20 Instructions For Use Manual

the packaging includes:

Beer dispensing tap (1.)(models with 2 taps contain 2 pieces
of beer dispensing taps) drip tray (2.) Service Key for the taps
(3.).

Connecting of the dispensing tap:

1.
Rotate the compensator lever (1.) in a downward direct (see
picture). You will set the most suitable or your desired flow
with the compensator lever on the dispensing tap.
2.
Fit the tap in an upright position onto the body with a cap
nut.
3.
Secure the cap nut and rotate to the left. (Loosen in the
opposite direction.)
4.
Tighten with the supplied key.
5.
beverage
Screw the plastic fitting F 5/8 x 9.5 mm onto the coupler
outlet
(beeroutlet).
20
COOLING AND DISPENSING SYSTEMS