Installation And Placing - LINDR PYGMY 20 Instructions For Use Manual

CAUTION: In case of damage to the
electrical circuit, you have to call trained
service technician. In no case should you
repair it yourself.
CAUTION: Special maintenance such as
cleaning and maintaining the cooling
system, must be carried out by trained,
authorized technicians who are familiar
with cooling and electrical systems.
CAUTION: When sanitizing with chemicals
ALWAYS wear rubber gloves.
CAUTION: After unpacking, place the cooler
in a way so that the heat that is generated
by the cooling unit and it can be sufficiently
ventilated.
CAUTION: The cooler must be placed
indoors on a dry and horizontal place that
is stable.
CAUTION: There should be no objects
placed on the cooler that would block the
air circulation.

Installation and placing:

Place the cooler on the fixed pad in a
horizontal position and before connecting
for the first time, allow the machine to
settle for about 2 hours to acclimatize to the
surrounding conditions.
CAUTION:
THE CHILLER SHOULD NOT BE PLACED ON ITS SIDE IN ANY
CIRCUMSTANCE, AND NOT EVEN DURING TRANSPORTATION.
Use the machine best in cold and well
ventilated room. The machine is intended
for use at ambient temperature min. 6 ° C
and max. 28 ° C. Do NOT use or store the
ˇ
machine at ambient temperature below 0 °
C. The machine is intended for use a normal
environment according to ČSN 33 2000-3
and is included in CLIMATE CLASS N.
This Machine MUST NOT BE CLOSE TO HEAT SOURCES, OR
EXPOSED to direct sunlight and rain.
For the proper operation, it is important not
to cover any of the ventilating holes.
Notice:
The electrical equipment must be revised
and checked in terms of ČSN 33 1600 edition
2 by a knowledgeable and authorized
person. Service-spare
revisions and inspections are carried out by
LINDR.
19 FLOW TYPE CONTACT COOLER LINDR
parts, required