Electrical Connection; How To Work With The Fittings; Disconnection; Environment Protection - LINDR PYGMY 20 Instructions For Use Manual

Electrical connection:

The machine has to be connected to a power
supply of 220-240V 50Hz with 16A circuit
breaker. Power plug circuit installation must
comply with applicable regulations DIN,
EN and ISO. lf the power cord is damaged,

How to work with the fittings:

12.
Push the tube into the fitting firmly (about 1.5 cm). The tube
must be cut straight to avoid any imperfect connections. lf
you can't insert the tube in, you need to moisten theend.

Disconnection:

13.
Hold the gray ring towards the body of the fitting and pull
out the tube.
CAUTION:
lf you don´t hold the gray ring while pulling the tube, the
fitting will cut even more intothe tube.
THE TUBE MUST NOT BE UNDER PRESSURE WHEN DISCONNECTING !

Environment protection.

Waste sorting
This product must not be disposed of with any household
waste. Packaging allows the recycling and reuse of used
products and packaging materials. Reduse of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials. Local regula tions may provide
for separate collection of household appliances in local
outlets or the point of purchase.
ˇ
it must be replaced by the manufacturer
or a qualified person in order to prevent
dangerous situations.
27 FLOW TYPE CONTACT COOLER LINDR
the gray ring