Operation; Adjusting The Table Top Height - LOGICDATA SMARTneo-2G Manual

7 OPERATION

Risk of minor or moderate injury through uncontrolled movement
CAUTION
The table may not always stop exactly at the expected position. Failure to anticipate the
table's movements may lead to minor or moderate injury through crushing.
• Wait until the system has completely stopped before attempting to use the table
Risk of minor or moderate injury through unsecured objects
CAUTION
While the table moves up and down, unsecured objects may fall off the table and onto
body parts. This may lead to minor or moderate injury through crushing.
• Ensure loose objects are kept away from the edge of the table
• Do not leave unnecessary objects on the table during movement
This section of the Operating Manual contains instructions for operating the Table System. All instructions
assume the reader has assembled a Table System that will be controlled by a Hand Control with an UP Key
and DOWN Key. If your Table System is operated by a different User Interface, consult that product's operat-
ing Manual for instructions on operating the Table System. The availability of some functions depends on
the Hand Control used. This section describes two variants:
• Comfort Hand Controls - These products have a digital display and can save Memory Positions
• Basic Hand Controls - These products have only an UP and DOWN key
Hand Control Keys are represented as follows for further description:
UP Key
DOWN Key
SAVE
SAVE Key (Comfort Hand Controls only)
1
Memory Position Key 1 (Comfort Hand Controls only)
2
Memory Position Key 2 (Comfort Hand Controls only)
3
Memory Position Key 3 (Comfort Hand Controls only)
4
Memory Position Key 4 (Comfort Hand Controls only)
7.1

ADJUSTING THE TABLE TOP HEIGHT

Risk of minor or moderate injury through crushing
CAUTION
Your fingers may be crushed when you attempt to change the height of the table
• Keep fingers away from moving parts
• Ensure that no persons or objects are in the table's range of motion
SMARTNEO - OPERATING MANUAL // PAGE 19