2.9 NOTES FOR RESELLERS
Resellers are companies that purchase LOGICDATA products for installation in their own products.
For reasons of EU conformity and product safety, Resellers should provide end users
INFO
with an Operating Manual in their native EU official language.
The Charter of the French Language (La charte de la langue française) or Bill 101
INFO
(Loi 101) guarantees the right of the population of Quebec to conduct business and
commercial activities in French. The bill applies to all products sold and used in Quebec.
For table systems that will be sold or used in Quebec, Resellers must provide all product-
relevant texts in French. These include, but are not limited to:
•
Operating Manuals
•
All other product documentation, including datasheets
•
Inscriptions on the product (such as labels), including those on product packaging
•
Warranty certificates
The French inscription may be accompanied with a translation or translations, but no
inscription in another language may be given greater prominence than that in French.
Operating Manuals must include all the safety instructions that end users require to
INFO
handle the product safely. They must also include an instruction to always keep the
Operating Manual in the immediate vicinity of the product.
No unauthorized persons (young children, persons under the influence of medications,
INFO
etc.) should be allowed to handle the product.
Resellers must perform a risk assessment on their product that covers residual hazards.
INFO
It must include measures to mitigate risk or reference the product's Operating Manual.
3 SCOPE OF DELIVERY
The scope of delivery for the SMARTneo-2G consists of the following components:
1
SMARTneo-2G Control Box
All other components required for assembly are to be provided by the Reseller unless otherwise stated by
LOGICDATA. Cables and Mounting Screws are not included in the scope of delivery.
SMARTNEO - OPERATING MANUAL // PAGE 10
1
Need help?
Do you have a question about the SMARTneo-2G and is the answer not in the manual?
Questions and answers
The table (smartNeo 2G) display is flashing "0"