Notes On Possible Property Damage - Samson 3271 Mounting And Operating Instructions

1.3 Notes on possible property damage

NOTICE
!
Risk of damage to the actuator due to incorrectly attached lifting equipment.
The eyebolt or swivel hoist on the top diaphragm case is intended for mounting and re-
moving the actuator as well as lifting the actuator without valve.
Î Do not lift the entire control valve assembly using the eyebolt or swivel hoist.
Î Do not attach load-bearing lifting equipment to the handwheel or travel stop.
Risk of actuator damage due to excessively high or low tightening torques.
Observe the specified torques on tightening actuator components. Excessively tightened
torques lead to parts wearing out quicker. Parts that are not tightened far enough may
loosen.
Î Observe the specified tightening torques (u AB 0100).
Risk of actuator damage due to the use of unsuitable tools.
Certain tools are required to work on the actuator.
Î Only use tools approved by SAMSON (u AB 0100).
Risk of actuator damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the actuator material. Unsuitable lubricants may
corrode and damage the surface.
Î Only use lubricants approved by SAMSON (u AB 0100).
EB 8310-7 EN
Safety instructions and measures
9