ILX Lightwave LDC-3926339 User Manual page 67

6a current source module
Table of Contents

Advertisement

C O M M A N D R E F E R E N C E
4
C H A P T E R
GPIB Command Reference
LASER:EVEnt?
Parameters
1 -
2 -
4 -
8 -
16 -
32 -
64 -
128 -
Notes
Examples
LASER:LDI
Parameters
Notes
Examples
LASER:LDI?
Parameters
Notes
Examples
50
LDC-3926339
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The LASER:EVEnt? query returns the contents of the Laser Event Status register.
None. The response is the sum of the following:
Current Limit changed state
Voltage Limit changed state
n/a
Power Limit changed state
Interlock changed state
n/a
n/a
Open Circuit changed state
The events in this register will not be reported to the LDC-3926's Status Byte unless they are
selected using the LASER:ENABle:EVEnt command.
The event status register is only cleared when it is read or by the *CLS command; the condition
status, however, is constantly changing.
LASER:EVE?-response: 131, means that an "Open Circuit Changed State" event (128), a "Voltage
Limit Changed State" event (2), and a "Current Limit Changed State" event (1) have occurred since
the last LASER:EVEnt? query.
The LASER:LDI command sets the laser constant-current setpoint.
An <nrf value> which represents the setpoint, in mA.
The setpoint is the same for both low and high bandwidth output modes.
The setpoint is read using the LASER:SET:LDI? query.
Laser:LDI 400-action: sets the laser output current to 400.00 mA.
LASER:ldi 100-action: sets the laser output current to 100.00 mA.
The LASER:LDI? query returns the value of the measured Laser current.
None. The response is an <nrf value>.
Response is the measured laser output current, regardless of control mode.
This measurement is updated approximately once every 600 msec.
LASER:ldi?-response: 30.0, means the measured laser output current is 30.0 mA.
Laser:LDI?-response: 149.6, means the measured laser output current is 149.6 mA.
256 -
Output Shorted changed state
512 -
Output Changed Tolerance state
1024 -
Output On changed state
2048 -
n/a
4096 -
n/a
8192 -
n/a
16384 -
n/a
32768 -
n/a

Advertisement

Table of Contents
loading

Table of Contents