Installation Preparation; Verify The Package Contents; Required Tools And Utilities; Installation Guide - Digisol DG-CS4616F Installation Manual

2.2 Installation Preparation

2.2.1 Verify the Package Contents

First, open the package; please check the contents of the switch container and
accessory kit. (If you are concerned that any item is missing or an incorrect item has been
supplied, please contact your dealer as soon as possible.)

2.2.2 Required Tools and Utilities

The required tools and utilities are shown below:
Cross screwdrivers

Flat-blade screwdriver

ESD wrist strap

Antistatic uniform

Caution!
Users should prepare the required tools and utilities by themselves.

2.3 Installation Guide

2.3.1 Installing the Switch

Please mount DG-CS4616F switch as below:
1. Attach the 2 brackets on the DG-CS4616F with screws provided in the accessory
kit.
Fig 2- 1 Fasten the Brackets to the Switch
Chapter 2-6
DG-CS4616F Installation Guide