Digisol DG-FS1526 User Manual
  1. Manuals
  2. Brands
  3. Digisol Manuals
  4. Switch
  5. DG-FS1526
  6. User manual

Digisol DG-FS1526 User Manual

Layer 2 fast ethernet web managed switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

DG-FS1526
Layer 2 Fast Ethernet Web Managed Switch

User Manual

V1.4
2012-4-5
As our products undergo continuous development the specifications are subject to change without prior notice

Advertisement

Table of Contents
loading

Related Manuals for Digisol DG-FS1526

Summary of Contents for Digisol DG-FS1526

  • Page 1: User Manual

    DG-FS1526 Layer 2 Fast Ethernet Web Managed Switch User Manual V1.4 2012-4-5 As our products undergo continuous development the specifications are subject to change without prior notice...
  • Page 2 Trademarks: DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property of the respective manufacturers. Safety This equipment is designed with the utmost care for the safety of those who install and use it.

  • Page 3: Table Of Contents

    4.1.2 Optional Accessories and Tools ............9 4.1.3 Choosing the Installation Location ..........10 4.1.3.1 Installing the DG-FS1526 on the Work Platform....... 10 4.1.3.2 Installing the DG-FS1526 on a Rack ........10 Hardware Description ................11 4.2.1 Front Panel..................11 4.2.2...
  • Page 4 DG-FS1526 User Manual Preparation Before Login..............15 Logging In to the Switch ..............16 System Management................18 7.3.1 Authentication Configuration ............18 7.3.2 System IP Configuration..............19 7.3.3 System Status ................20 7.3.4 Loading Default Settings ..............20 7.3.5 Firmware Update................21 7.3.6...
  • Page 5 DG-FS1526 User Manual 7.9.1 STP Bridge Settings ............... 46 7.9.2 STP Port Settings................48 7.9.3 Loopback Detection: ..............50 7.10 Trunking....................51 7.11 DHCP Relay Agent ................54 7.11.1 DHCP Relay Agent................. 54 7.11.2 Relay Server .................. 55 7.11.3 VLAN MAP Relay Agent..............55 7.12...

  • Page 6: Precautions

    DG-FS1526 User Manual Precautions  Power supply sockets with too heavy load or broken cables and plugs may cause electric shock or fire. Users should check the power supply wires and cables regularly. If there is any breakage, please replace the cable at once.

  • Page 7: Overview

    DG-FS1526 User Manual Overview The DG-FS1526 is an intelligent Layer 2 Ethernet switch. It provides 24 10M/100M self- adaptive Ethernet ports and 2 gigabit combo ports. The combo ports can be flexibly connected to gigabit copper cable or backbone fiber. You can select 1000BASE-LX, 1000BASE-SX or 1000BASE-T interface according to the transmission distance.

  • Page 8: Technical Specifications

    DG-FS1526 User Manual Technical Specifications Environment Requirements The whole device can survive in a wide range of operating temperature and can work normally and stably in tough environment.  Operating temperature: 0˚C—40˚C  Storage temperature: -10˚C—70˚C  Relative humidity: 10%—90% (non-condensing) ...

  • Page 9: Physical Characteristics

    Gross Weight: 3.9 Kgs Device Installation and Description Preparation Before Installation 4.1.1 Package Contents  DG-FS1526 Fast Ethernet Switch  Power Cord  Bracket Mounting Kit containing two brackets and six screws for attaching the brackets to the switch ...

  • Page 10: Choosing The Installation Location

    On a rack 4.1.3.1 Installing the DG-FS1526 on the Work Platform The common way is to install the DG-FS1526 on a clean work platform. Pay attention to the following precautions:  Ensure that the work platform is flat and stable.

  • Page 11: Hardware Description

    Keep the device powered on and push a paper clip into the hole. Reset Press down the button for about 5 seconds. The system restores the factory default settings. The following table describes the twenty-seven LED indicators of the DG-FS1526. Color Status Description Indicator The power is off.

  • Page 12: Rear Panel

    4.3.1 Setting Up the Power Interface After placing the DG-FS1526 to a flat and stable surface, insert the supplied power cable to the power socket, and connect the other end of the cable to the power interface of DG- FS1526.
  • Page 13 DG-FS1526 User Manual The following figure describes the line sequence of Ethernet cable: Figure 1 Pinout of Ethernet interfaces Crossover cable: Refer to 0 to connect one end of the network cable. Refer to 0 to connect the other end.

  • Page 14: Device Startup

    DG-FS1526 User Manual Definition Color TXD- Orange Brown and white Brown Note: To ensure good quality of the data signal, the length of the network cable connected to the Ethernet interface should be shorter than 100m. Device Startup Check Before Power-On Before powering on the device, check the following: ...

  • Page 15: Device Upgrade

    DG-FS1526 User Manual Device Upgrade You can upgrade software through any Ethernet port for DG-FS1526. After software upgrade is complete, the system reboots automatically. Web Configuration and Management The system does not support the CLI and telnet management. It supports the web management only.

  • Page 16: Logging In To The Switch

    DG-FS1526 User Manual Ping the maintenance IP address (192.168.2.1 by default) of the switch. See the following figure. If the PC can read the MAC address of the switch and can ping through the maintenance IP address of the switch, that means the communication of the PC and the switch is normal.
  • Page 17 DG-FS1526 User Manual Click OK to log in. After logging in to the switch successfully, the following page appears.

  • Page 18: System Management

    DG-FS1526 User Manual System Management Choose Administrator, and the sub-menus of Administrator are shown as below. 7.3.1 Authentication Configuration Choose Administrator > Authentication Configuration, and the following page appears. Read the Note in the page, and change the user name and password. After proper configuration, click Update to apply the settings and then Reboot the device for the changes to take effect.

  • Page 19: System Ip Configuration

    DG-FS1526 User Manual 7.3.2 System IP Configuration Choose Administrator > System IP Configuration, and the following page appears. In this page, you can set the maintenance IP address of the switch, subnet mask, and gateway. After proper configuration, click Update to apply the settings and then Reboot the device for the...

  • Page 20: System Status

    DG-FS1526 User Manual 7.3.3 System Status Choose Administrator > System Status, and the following page appears. In this page, you can view the MAC address, number of ports, and system version. You can also set a comment. 7.3.4 Loading Default Settings Choose Administrator >...

  • Page 21: Firmware Update

    DG-FS1526 User Manual 7.3.5 Firmware Update Choose Administrator > Firmware Update, and the following page appears. In this page, enter the login password. Then click Update. A pop up page will appear asking you to select new file for updating the firmware.

  • Page 22: Port Management

    DG-FS1526 User Manual Port Management Choose Port Management, and the submenus of Port Management are shown as below. 7.4.1 Port Configuration Choose Port Management > Port Configuration, and the following page appears. In this page, you can set Tx/Rx Ability, Auto-Negotiation, Speed, Duplex, Pause,...
  • Page 23 DG-FS1526 User Manual...

  • Page 24: Port Mirroring

    DG-FS1526 User Manual 7.4.2 Port Mirroring Choose Port Management > Port Mirroring, and the following page appears. In this page, you can enable port mirroring service. The packets from source port transmit to destination port. Field Description Dest Port You can select one or more.

  • Page 25: Bandwidth Control

    DG-FS1526 User Manual 7.4.3 Bandwidth Control Choose Port Management > Bandwidth Control, and the following page appears.

  • Page 26: Broadcast Storm Control

    DG-FS1526 User Manual Field Description Port No. You can select the port number from the drop-down list. Tx Rate The range of transmitting rate is 0 ~ 255. 0 means full speed. Rx Rate The range of receiving rate is 0 ~ 255. 0 means full speed.

  • Page 27: Vlan Configuration

    DG-FS1526 User Manual Field Description The valid range is 1 ~ 63. This value indicates the number of broadcast packets that are allowed to enter each port in one time unit. One time Threshold unit is 50us for Gigabit speed, 500 us for 100Mbps speed, and 5000us for 10Mbps speed.

  • Page 28: Vlan Mode

    DG-FS1526 User Manual 7.5.1 VLAN Mode 7.5.1.1 VLAN Based on Port Choose VLAN Setting > VLAN Mode, and the following page appears. The default mode is Port Based VLAN. Click Change VLAN mode to change the VLAN mode. Once "Change VLAN mode" is selected, a warning message will appear. Select "Continue"...

  • Page 29: Vlan Based On Tag

    DG-FS1526 User Manual 7.5.1.2 VLAN Based on Tag In the tag based vlan mode, you can modify the packet contents that are transmitted from port. You can add tag or remove tag. If you do not want to modify the packets, select don't...

  • Page 30: Vlan Member

    DG-FS1526 User Manual 7.5.2 VLAN Member 7.5.2.1 VLAN Based on Port Choose VLAN Setting > VLAN Member, and the following page appears.

  • Page 31: Vlan Based On Tag

    DG-FS1526 User Manual Field Description Port Select the corresponding port from the drop-down list. Dest PORT (check Select the corresponding port that is in the same VLAN of the box) current port. v indicates the following: The port in the row and the port in the VLAN MEMBER column are in the same VLAN.
  • Page 32 DG-FS1526 User Manual The following figure displays the VLAN configuration in the tag mode Field Description Select the Vlan ID to be assigned to the VLAN and click on Add to enter the VID. Once the VID is added it will appear in the drop down list.

  • Page 33: Multi To 1 Setting Configuration

    DG-FS1526 User Manual To add vlan, enter a VID and select vlan member for this entry from vlan member list. Now select “Add” button to add vlan entry to the table. Vlan entry can be modified by selecting VID from the list and then select “Update” button.

  • Page 34: Per Port Counter

    DG-FS1526 User Manual Per Port Counter Choose Per Port Counter, and the Port Counter submenu is shown as below. Choose Per Port Counter > Port Counter, and the following page appears. In this page, you can view the packet quantity.
  • Page 35 DG-FS1526 User Manual...

  • Page 36: Qos Configuration

    DG-FS1526 User Manual Field Description Select it from the drop-down list: Counter Mode Selection Click Update to view the corresponding packet quantity. Refresh Click the button to refresh the counter information. Clear Click the button to clear the counter information.

  • Page 37: Priority Mode

    DG-FS1526 User Manual Choose QoS Setting, and the sub-menus of QoS Setting are shown as below. 7.7.1 Priority Mode Choose QoS Setting > Priority Mode, and the following page appears. In this page, you can set the priority mode. The system supports the following three priority modes.

  • Page 38: Class Of Service Configuration - 1

    DG-FS1526 User Manual 7.7.2 Class of Service Configuration - 1 Choose QoS Setting > Port, 802.1p, IP/DS based, and the following page appears. The COS of port supports the following mode.  Based on port  Based on 802.1p: The priority is determined according to the value of 802.1p (bit [15:13]) in the VLAN Tag.

  • Page 39: Class Of Service Configuration - 2

    DG-FS1526 User Manual  For IPv4 packets, the priority is determined according to the value of TOS [5:0] in the header. Packets in which values of TOS [5:0] are 101110, 001010, 010010, 011010, and 11x000 map to higher priority. Packets in which TOS [5:0] are other values map to lower priority.
  • Page 40 DG-FS1526 User Manual DG-FS1526 User Manual 40 40...

  • Page 41: Security

    DG-FS1526 User Manual Field Description You can select it from the drop-down list: Option  Port: The valid range is 1 ~ 65535. User_Define  Mask: The valid range is 0 ~ 255.  Override: When the "override" item is selected, the...

  • Page 42: Mac Address Binding

    DG-FS1526 User Manual 7.8.1 MAC Address Binding Choose Security > MAC Address Binding and the following page appears. After MAC address binding is enabled at a port, only devices whose MAC addresses are consistent with the bound MAC address can communicate through the port. A port can be bound to a maximum of three MAC addresses.
  • Page 43 DG-FS1526 User Manual The configuration procedure: Step 1 Enter the MAC address. Step 2 Select the port that you want to bind MAC address. Step 3 Select Enable from the drop-down list to enable the binding service. Step 4 Click Update to apply the service of MAC address binding.

  • Page 44: Tcp/Udp Filter

    DG-FS1526 User Manual 7.8.2 TCP/UDP Filter Choose Security > TCP/UDP Filter and the following page appears. TCP/UDP port filter discards the set protocol packets at the secure WAN port. All ports can be set to secure WAN ports, and the available protocols include FTP, HTTP, and TELNET.

  • Page 45: Spanning Tree

    DG-FS1526 User Manual The configuration procedure: Select Enable from the drop-down list to enable the TCP/UDP filter service. Select port filtering rule. Negative means the selected protocol will be dropped and other protocols will be forwarded. Positive means the selected protocol will be forwarded and other protocol will be dropped.

  • Page 46: Stp Bridge Settings

    DG-FS1526 User Manual 7.9.1 STP Bridge Settings Choose Spanning Tree > STP Bridge Settings, and the following page appears.
  • Page 47 DG-FS1526 User Manual Field Description You can select it from the drop-down list: STP Mode The valid range is 0 ~ 61440. The lower integer value for Bridge Priority precedence indicates the higher priority. And the integer should be a multiple of 4096.

  • Page 48: Stp Port Settings

    DG-FS1526 User Manual 7.9.2 STP Port Settings Choose Spanning Tree > STP Port Settings, and the following page appears.
  • Page 49 DG-FS1526 User Manual Field Description Port No. Select it from the drop-down list. Priority The valid range is 0 ~ 240. It should be a multiple of 16. Root Path Cost. The valid range is 1 ~ 200000000. 0 indicates Auto.

  • Page 50: Loopback Detection

    DG-FS1526 User Manual 7.9.3 Loopback Detection: Choose Spanning Tree > Loopback Detection to configure loopback detection on an interface. When loopback detection is enabled and a port receives it’s own BPDU, the detection agent drops the loopback BPDU and places the interface in discarding mode. This...

  • Page 51: Trunking

    DG-FS1526 User Manual These parameters are displayed: Field Description Loopback Detection Function Enables/Disables (Default: disable) Auto Wake Up Configures the interface for automatic loopback release. Wake-Up Time interval Defines the time interval for the port that will be released from the discarding state.
  • Page 52 DG-FS1526 User Manual Choose Trunking > Link Aggregation Settings, and the following page appears.
  • Page 53 DG-FS1526 User Manual Field Description System Priority The valid range is 1 ~ 65535. You can select it from the drop-down list: Link Aggregation Algorithm The system supports three link groups.  Link Group 1: It includes the following ports: 1, 2, 3, 4.

  • Page 54: Dhcp Relay Agent

    DG-FS1526 User Manual Note: When you configure trunking service, you need to disable the Pause and Backpressure of corresponding port in the Port Configuration page in the Port management navigation. After proper configuration, click Submit to apply the settings. Click Refresh to refresh the state of link group.

  • Page 55: Relay Server

    DG-FS1526 User Manual Field Description Select Enable or Disable to start or Stop the DHCP relay agent DHCP relay State respectively. DHCP relay Hop Sets the maximum allowed number in the hops field of the count limit BOOTP/DHCP header. DHCP relay option Select Enable or Disable to start or Stop the DHCP relay option 82 respectively.

  • Page 56: Configuration Backup And Recovery

    DG-FS1526 User Manual 7.12 Configuration Backup and Recovery Choose Backup/Recovery, and the following page appears. In this page, you can download the switch configuration to PC, or upload the configuration file to switch according to the page attention.

  • Page 57: Miscellaneous Configuration

    DG-FS1526 User Manual 7.13 Miscellaneous Configuration Choose Miscellaneous, and the following page appears. In this page, you can enable Aging, VLAN striding and set VLAN uplink.

  • Page 58: Snmp Settings

    DG-FS1526 User Manual 7.14 SNMP Settings Choose SNMP Settings, and the following page appears. In this page, you can configure SNMP related parameters. Field Description Community Name. The community name used by SNMP. Access Right The right of community name.

  • Page 59: Logout

    DG-FS1526 User Manual 7.15 Logout Choose Logout, and the following page appears. In this page, the system asks you whether to logout. Click Accept to logout. Click Back to return to the previous page.

  • Page 60: Troubleshooting

    DG-FS1526 User Manual Troubleshooting If a fault occurs, refer to the following table for troubleshooting: Symptom Suggested Solution The Power indicator is not  Check whether the power is correctly connected. ON after the system is  Check whether the power switch is turned on.

  • Page 61: Glossary

    DG-FS1526 User Manual Glossary Auto-negotiation: Auto-negotiation is an Ethernet procedure by which two connected devices choose common transmission parameters, such as speed, duplex mode, and flow control. In this process, the connected devices first share their capabilities as for these parameters and then choose the highest performance transmission mode they both support.
  • Page 62 DHCP servers to assign fixed IP addresses, or set other services or policies for clients. This product comes with Life time warranty. For further details about warranty policy and Product Registration, please visit support section of www.digisol.com...

Table of Contents