5.2 Sample Computer Link Protocol Program
This section shows a sample program that runs on the host computer (a personal
computer or workstation) and that uses computer link protocol transmission.
This program issues a read/write request for 32 words from the start of the S controller D
registers.
Operating environment
• Hardware: Toshiba J-3100PV, PC/AT compatible
• Software: PC-NFS Pro 1.1.1.0
Transfer parameters
• Local IP address:
• Local UDP port number:
• Remote IP address:
• Remote UDP port number: 3001
6F8C0904
3Com Etherlink III (3C509/B)
Microsoft VisualC++ 1.0
133. 113. 98. 200
3001
133. 113. 98. 10
5.2 Sample Computer Link Protocol Program
5
65