Installation And Wiring; Installation Environment And Base Unit Mounting - Toshiba V Series User Manual

Chapter 9 Installation and Wiring

9.1 Installation Environment and Base Unit Mounting

The EN311 must be used in the installation environment described in "Installation
Environment" section of the S3 User's Manual - Hardware. Also, the EN311 panel must
be installed according to the guideline included in "Installation Environment" section.
The S controller base unit must also be mounted according to the guideline included in
section 4.2, "Registering the EN311" of the T3 User's Manual - Hardware.
• Only use this equipment in the environment described in the S3 User's Manual - Hardware.
Using this equipment in any other environment can cause electrical shocks, fires, failures,
and malfunctions.
• Mount this equipment according to the mounting procedure specified in the S3 User's Man-
ual - Hardware.
Mounting in any direction other than the specified direction, or defective or inadequate
mounting, can result in the equipment falling, fires, failures, and malfunctions.
6F8C0904
Caution
205