Toshiba V Series User Manual page 239

Integrated controller ethernet module, en311
Hide thumbs Also See for V Series:
Table of Contents

Advertisement

Error
LAN controller
driver error
Memory pool
allocation failure
Port 2 task start
failure
Broadcast
specification error
MAC address
specification error
Insufficient
resources error
Error in the
receive request
from S3 (Number
of words)
Transmission
buffer full
Remote station
window size is too
small
6F8C0904
Table C-2 Detailed Information
Code
90H
• Occurs if the setting of the local station IP address and port
number in the area reserved for transmission fails.
91H
• Error in the TCP or UDP protocol (such as a transmission phase
error)
• The TCP socket was used to make the transmit request to the
socket (with the NOACK bit of the socket status is ON) due to
remote-station down.
92H
• Occurs if the setting of the remote station IP address in the
remote station information area fails.
• Occurs if the remote station IP address network address differs
from the local station IP address network address.
A0H
Occurs if the EN311 internal OS fails to allocate memory.
A1H
Occurs if computer link or PC link socket identifier acquisition fails.
A2H
If the remote destination was specified to be broadcast in a remote
station verification request.
B0H
BCC error
B1H
Occurs if an error occurs after address saving on a MAC setup
request.
C0H
• Occurs if transmission is repeated to a non-existent remote sta-
tion with a cycle less than 100 ms.
• The UDP socket was used to make the transmit request when
the buffer in the EN311 became full without taking the receive
data over to the S3 side.
C1H
Occurs if the data size
specified by the user program
C2H
Occurs if the size specified by the user program is out of range
(1 to 1000 words).
C3H
Occurs if the remaining transmission buffer of the socket in which
the transmission request data is accumulated is smaller than the
data size of the transmission request for the TCP socket
transmission.
C4H
Occurs if the window size of the remote station ACK is smaller than
the data size of the transmission request for the TCP socket
transmission.
Description
<
the data size received by the
EN311
C
219

Advertisement

Table of Contents
loading

Table of Contents