Mounting For Clip-On I/O Modules - Toshiba OIS PLUS Series User Manual

2.6.4 Mounting for Clip-on I/O Modules

Below given is the mounting informat ion applic able to expans ions with OIS PLUS base
models. While unpacking the display. note the two (2) locking connectors.
User can attach and detach the expansion model with the help of these locking connectors.
While seen from both the sides of the expansion models. there is a slot in which the long part of the
locking connector rests as shown below:
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com