Valve Wiring - J&M SpeedTender LC290 Operator's Manual

• Use a good set of Allen wrenches when changing orifices.
• The cartridge should be tightened with 25 ft-lbs of torque.
• The coil nut should be tightened with 5 ft-lbs of torque.
• There is a spring, poppet valve, and ball bearing at the bottom of each coil.
• The top coil operates the bottom port.
• The bottom coil operates the top port.
• When changing cartridge make sure all functions are at rest.
• The lettering on the coils should always be facing up.

Valve Wiring

P
E N
D
F M
A C
G L
B
H K
J
Connector
Letter Function
A N/A
B N/A
C Conveyor Swing Front
D Conveyor Swing Rear
E Conveyor Up
F Conveyor Down
G Rear Door Up
H Front Door Down
J Power
K Front Door Up
L Rear Door Down
M N/A
N Conveyor Start
P Ground
Letter Function
A N/A
B N/A
C Conveyor Swing Front
D Conveyor Swing Rear
E Conveyor Up
F Conveyor Down
G Rear Door Up
H Front Door Down
J Power
K Front Door Up
L Rear Door Down
M N/A
N Conveyor Start
P Ground
31