J&M SpeedTender LC290 Operator's Manual page 13

Field Operation
WARNING: The SpeedTender must be hooked to the towing vehicle during loading and unloading.
1. Position the SpeedTender next to the planter/drill so the conveyor will reach the planter box.
2. Release the ratchet strap from the conveyor.
3. Start the hydraulic power unit and increase throttle speed. Allow hydraulic fluid to warm up.
4. Raise the conveyor off the conveyor rest using the handheld control.
WARNING: When operating the hydraulic swing option, do not stand in the operating range of the conveyor.
5. Check to make sure the hopper is in the up position.
6. Open door on SpeedTender using the supplied remote.
WARNING: Empty the rear compartment first to prevent the chance of flipping the SpeedTender.
Operations
Conveyor Rest
Ratchet Strap
Hopper Up
Conveyor
Operating Range
13