Setting Parameters - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting parameters

Set the parameters using the engineering tool and EtherNet/IP Configuration Tool.
Setting the engineering tool
■Setting the RJ71EIP91 (originator)
Connect the engineering tool to the scanner-side CPU module and set the parameters.
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [Setting Change] button to use the module label.
3.
Click the [OK] button to add the module labels of the CPU module.
4.
Set the RJ71EIP91 as follows.
[Navigation window] [Parameter] [Module Information]
7.1 Communication Example between RJ71EIP91 and EtherNet/IP Device
Right-click [Add New Module]
7 COMMUNICATION EXAMPLE
7
31