Mitsubishi Electric MELSEC iQ-R Series User Manual page 35

Setting EtherNet/IP Configuration Tool
Start EtherNet/IP Configuration Tool, and then set the parameters.
■IP address setting of the RJ71EIP91 (originator)
Set the IP address in the "Add New Element" window that is popped up when EtherNet/IP Configuration Tool is started.
Set the same IP address as that set in "Basic Setting" in the engineering tool.
■Adding the EDS file
1.
Open the "EDS Management" window to add an EDS file for the EtherNet/IP device to "Device Library".
[Library] [Add]
2.
Click the [Next] button in the "EDS Management" window.
3.
Click the [Browse] button.
7.1 Communication Example between RJ71EIP91 and EtherNet/IP Device
7 COMMUNICATION EXAMPLE
7
33