Mitsubishi Electric MELSEC iQ-R Series User Manual page 41

6.
Write the set parameters to the RJ71EIP91.
[File] [Download]
• Set the IP addresses for the personal computer connected to the RJ71EIP91 so that they have the same
class and subnet address.
• For the Class1 tag communication settings, match a Tag name and data size of the RJ71EIP91 (originator)
by those of the RJ71EIP91 (target).
• In the program example, default values are used for parameters that are not shown above. For the
parameters, refer to the following.
 MELSEC iQ-R EtherNet/IP Network Interface Module User's Manual (Application)
7.1 Communication Example between RJ71EIP91 and EtherNet/IP Device
7 COMMUNICATION EXAMPLE
7
39