Login Password - Panasonic KX-HNB700 User Manual

[Device Profiles]
See "HD camera device profiles", Page 130.
[Notification Settings]
You can select which types of status notifications are displayed, and which are not.
– [Motion Detect]
This setting determines whether a notification is displayed when the camera detects motion.
– [Camera Recording]
This setting determines whether a notification is displayed when camera images are being recorded.
– [Temperature Alert]
This setting determines whether a notification is displayed when the camera's temperature sensor is
triggered.
– [Sound Detection Alert]
This setting determines whether a notification is displayed when the camera's sound sensor is
triggered.
– [Shutter Open/Close]
This setting determines whether a notification is displayed when the camera's privacy shutter is
opened or closed.
– [Device Error]
This setting determines whether a notification is displayed when a device error is detected.
[Wireless Settings]
See "Network features", Page 130.
[Wireless Access Point]
See "Deleting wireless access points", Page 131.
[Reset HD Camera]
See "Resetting the HD camera's settings", Page 132.

Login password

You can change the password that is used to connect to the camera.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 111).
3
Tap [Settings].
4
Tap [Change Login Password].
5
Enter the desired password and then tap [OK].
R To display the characters that you have entered, turn on the [Show Password] checkbox.
Note:
R If you forget the login password, reset the camera ( "Resetting the HD camera's settings", Page 132),
and then set up the camera again by following the initial setup procedure (see "Setting up the HD
camera", Page 108).
Using an HD camera
129