Panasonic KX-HNC800 Quick Setup Manual

Quick Setup Guide
KX-HNC800/KX-HN1003
Home Monitoring Camera
Prepare the camera.
1
Plug in the camera and wait about 1 minute for
the camera's LED to light in green.
Download the HomeHawk app, then tap its
2
icon to start the app.
https://panasonic.net/cns/pcc/support/homehawk
iPhone: Search for
iPad: Search for "Panasonic HomeHawk"
"iPhone only" category.
Android: Search for
Follow the on-screen instructions. When
3
prompted, tap [Indoor HD Camera] → [Set
up the HD Camera].
Printed in China
PNQW5543YA
CC1217YK1038
"Panasonic HomeHawk".
in the
"Panasonic HomeHawk".
Support page
Panasonic Support Site:
When prompted, press the [SETUP] button
4
on the back of the camera.
The LED indicator on the camera will begin
blinking in green.
5
iPhone/iPad
Android users: Skip this step
5.1 Press the home button on your mobile
device to close the HomeHawk app.
5.2 Change your mobile device's wireless
LAN setting.
Open the [Settings] app, tap [Wi-Fi], select
"KX-HNC800_Panasonic", enter "00000000"
as the password, and then tap [Join].
5.3 Start the HomeHawk app again.
If prompted, enter the password for your
6
wireless router and then tap [Next].
When prompted, press the [SETUP] button
7
on the back of the camera.
Follow the on-screen instructions and set
8
the camera's login password.
This password will be required in order to
access the camera.
Follow the on-screen instructions and
9
complete the setup.
A list of all cameras registered to the app is
displayed.
Enjoy your HD camera!
10
https://panasonic.net/cns/pcc/support/homehawk
http://shop.panasonic.com/support