Using an HD camera
[Device Profiles]
See "HD camera device profiles", Page 171.
[Notification Settings]
You can select which types of status notifications are displayed, and which are not.
– [Motion Detect]
This setting determines whether a notification is displayed when the camera detects motion.
– [Camera Recording]
This setting determines whether a notification is displayed when camera images are being recorded.
– [Temperature Alert]
This setting determines whether a notification is displayed when the camera's temperature sensor is
triggered.
– [Sound Detection Alert]
This setting determines whether a notification is displayed when the camera's sound sensor is
triggered.
– [Shutter Open/Close]
This setting determines whether a notification is displayed when the camera's privacy shutter is
opened or closed.
– [Device Error]
This setting determines whether a notification is displayed when a device error is detected.
[Wireless Settings]
See "Network features", Page 171.
[Wireless Access Point]
See "Deleting wireless access points", Page 172.
[Reset HD Camera]
See "Resetting the HD camera's settings", Page 173.
Login password
You can change the password that is used to connect to the camera.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 151).
3
Tap [Settings].
4
Tap [Change Login Password].
5
Enter the desired password and then tap [OK].
R To display the characters that you have entered, turn on the [Show Password] checkbox.
Note:
R If you forget the login password, reset the camera ( "Resetting the HD camera's settings", Page 173),
and then set up the camera again by following the initial setup procedure (see "Setting up the HD
camera", Page 149).
170