Login Password; Hd Camera Device Profiles - Panasonic KX-HNB700 User Manual

– [Temperature Alert]
This setting determines whether a notification is displayed when the camera's temperature sensor is
triggered.
– [Sound Detection Alert]
This setting determines whether a notification is displayed when the camera's sound sensor is
triggered.
– [Shutter Open/Close]
This setting determines whether a notification is displayed when the camera's privacy shutter is
opened or closed.
– [Device Error]
This setting determines whether a notification is displayed when a device error is detected.
[Wireless Settings]
See "Network features", Page 80.
[Wireless Access Point]
See "Deleting wireless access points", Page 81.
[Reset HD Camera]
See "Resetting the HD camera's settings", Page 81.

Login password

You can change the password that is used to connect to the camera.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 60).
3
Tap [Settings].
4
Tap [Change Login Password].
5
Enter the desired password and then tap [OK].
R To display the characters that you have entered, turn on the [Show Password] checkbox.
Note:
R If you forget the login password, reset the camera ( "Resetting the HD camera's settings", Page 81),
and then set up the camera again by following the initial setup procedure (see "Setting up the HD
camera", Page 58).

HD camera device profiles

The camera's device profile allows you to assign a name and location to the camera. These settings are
especially convenient when you have multiple cameras. You can also change the camera's date and
time setting.
1
View live images from the desired camera.
2
Open the options menu (see "Displaying the options menu", Page 60).
3
Tap [Settings].
4
Tap [Device Profiles].
5
Change the settings as desired, and then tap [OK].
– [Location]: This setting determines the location name assigned to the camera.
– [Name]: This setting determines the name assigned to the camera.
Using an HD camera
79